Photos, descriptions and specs are for general reference and may vary- They may not depict actual Rental unit.
Submersible, 2" - 1/2 H.P. (Electric)
Pumps

MQ ST2037


 

2 Inch Discharge, 115V 1Ø, 1.0 HP, 73 GPM, 37' Total Head
This lightweight, compact submersible centrifugal pump is ideal for moving water in multiple confined and open area applications. This is a powerful, versatile, low maintenance pump that is perfect for a wide range of operations supporting Contractors, Service Utilities, Municipalities, and Homeowners. Further, the ST2037 incorporates a rugged cast aluminum housing, internal thermal overload protection, dual shaft seals, sealed ball bearings impeller and molded 25’ Power Cable with strain relief.
>1.0HP, 115V/9.8A, 1Ø, UL & CUL Listed Electric Motor.
>Built-in Overload Protection.
>2” (NPT) Female Discharge Port.
>Reliable double mechanical oil-filled seals.
>Cast iron/steel motor casing serves as heat conductor.
>Pumps Liquid Up To 120° F.
>25’ of molded power cord w/strain relief
>Dewaters Flat Surfaces Up To 1/2” Levels.

 

Unit Specifications
Impeller Type Neoprene Rubber over
Cast-Iron
Impeller Disc Size 2 in
Total Head 37 ft
Water Capacity 73 gpm
Max. Solid Intake 0 in
Electrical Specifications
Power 1 HP
Phase Single
Voltage 115 V
Starting Amperage 34.5 A
Running Amperage 6.9 A
Cable Length 50 ft
Dimensions & Weights
Pump Diameter 7.4 in
Overall Height 15.4 in
Operating Weight 31 lb

 

For additional information on this product please call us at 877-289-7368

ST2038P


 

2 Inch Discharge, 115V 1Ø, 1.0 HP, 60 GPM , 38' Total Head
This lightweight, compact submersible centrifugal pump is ideal for moving water in multiple confined and open area applications. The unique casing design of this pump permits it to draw water to a level of 1/16” without having to place the pump in any kind of sump. This versatile, low maintenance pump is perfect for a wide range of operations supporting Contractors, Service Utilities, Municipalities, and Homeowners. Further, the ST2038P incorporates a rugged cast aluminum housing, internal thermal overload protection, dual shaft seals, sealed ball bearings impeller and molded 19’ Power Cable with strain relief.
>1.0HP, 115V/8.0A, 1Ø, UL & CUL Listed Electric Motor.
>Built-in Overload Protection.
>2” (NPT) Female Discharge Port.
>Reliable double mechanical oil-filled seals.
>Cast iron/steel motor casing serves as heat conductor.
>Pumps Liquid Up To 120° F.
>50’ of molded power cord w/strain relief
>Dewaters Flat Surfaces Up To 1/16” Levels.

 

 
Unit Specifications
Impeller Type Neoprene Rubber over
Cast-Iron
Impeller Disc Size 2 in
Total Head 38 ft
Water Capacity 60 gpm
Max. Solid Intake 0 in
Electrical Specifications
Power 1 HP
Phase Single
Voltage 115 V
Starting Amperage 56 A
Running Amperage 6.5 A
Cable Length 50 ft
Dimensions & Weights
Pump Diameter 7.7 in
Overall Height 15.4 in
Operating Weight 14 lb

Tsurumi LSR2.4S-60


 

Submersible Ground Drainage Pump w/ 2" Discharge
•Easily holds suction for drainage down to .2" water
2/3-HP 6.1-Amp Motor (12.5-Amp Starting) w/ Thermal Protection
•Continuous duty rated, capable of pumping up to 3744 GPH
Urethane, Semi-Vortex Impeller & Wear Plate
•Designed for maximum durability & pump performance
Double Inside Mechanical Seal w/ Silicon Faces
•Provides the longest operational life of any seal available
Oil Lifter
•Provides lubrication of the seal faces
V-Ring Seal Design
•Protects mechanical seal from abrasive particles
32' Power Cord
•Great for outdoor applications

 

Model
Model Number: LSR2.4S-60
Manufacturer: Tsurumi Pump
Motor
Continuous Operation: Yes
Oil-Cooled: Yes
Shaft Seal: Silicon Carbide
Running Amps: 6.1-Amps
Voltage: 120-Volt
HP/CC: .66 HP
Pump
Gallons Per Minute: 62.4 GPM
Outlet Diameter: 2"
Mechanical Seal Material: Silicon Carbide
Housing Material: Thermoplastic
Impeller Material: Plastic
Solids Handling: .236 Inch
Total Head Lift: 39.5 Feet
Overview
Weight: 28 Lbs. (12.70 kilograms)
Dimensions: L x 8.25"W x 11.375"H
(0.00 x 20.96 x 28.89 cm)

Daily* Weekly* Monthly*
$55.00 $165.00 $495.00
* "Rent Now" is not a reservation or a guarantee of availability. An Associate will contact you once your request has been submitted. Equipment Makes & Models shown may vary from the actual Rental unit you receive.

Back