Photos, descriptions and specs are for general reference and may vary- They may not depict actual Rental unit.

Stump Grinder, Large w/Trailer
Stump Grinders

* "Rent Now" is not a reservation or a guarantee of availability. An Associate will contact you once your request has been submitted. Equipment Makes & Models shown may vary from the actual Rental unit you receive.

Vermeer SC252


Equipped with exclusive features, the SC252 provides full-sized stump-cutting power in a compact unit. Safety features include a patented cutter wheel guard and an operator presence system that disengages the cutter wheel if the operator lets go of the controls. Yellow Jacket Cutter System helps extend pocket and tooth life.


General Dimensions and Weights
Length 115"
Width 35"
Height 53"
Overall Height Transport 53"
Weight  1040 lbs
Sound Power 103 dB(a)
 Make and Model
Kohler Command
Number of Cylinders 2
Gross Horsepower (Maximum) 27 hp
Torque (Max) 42.7 ft-lb
Fuel Tank Capacity 6 gal
Max Fuel Consumption 2.4 gph
Fuel Type Gas
Maximum Angle of Continuous Operation 21 deg
Cooling Medium Air
Clutch Type Electric clutch with brake
Cutterwheel Diameter without Teeth
Cutterwheel Thickness 0.5"
Cutterwheel Speed 1300 rpm
Cutterwheel Straight Line Dimension 39"
Cutterwheel Cut Above Ground 25"
Cutterwheel Cut Below Ground 13"


For additional information on this product please call us at 877-289-7368

Rayco Super Jr RG1625


Features and Benefits:
>3-Position swing out operator control station provides excellent visibility of the cutting action and swings in-line with the machine to pass through narrow openings
>Auxiliary chip retainer curtains to catch flying debris and minimize clean-up time
>Hydraulic steering with oscillating front axle
>Ergonomic controls with soft-touch control levers
>RG1625 Super Jr-S is powered by 25hp Kohler gasoline engine


Weight RG1625SJR-S
1,350 lb (612 kg)
Length 113" (287.02 cm)
Hood Height 38" (96.52 cm)
Maximum Height 57" (144.78 cm)
Width 35" (89 cm)
Width w/ Dual wheels 49" (124.46 cm)
Ground Drive Self-Propelled Hydraulic, Variable Speed
Engine RG1625SJR-S 25 hp (18.4 kW) Kohler Command, Gasoline
Fuel Tank 6.5 gal (24.6 L)
Clutch Electromagnetic w/Wheel Brakes
Super Tooth 18 total
Cutter Wheel Diameter 17.25" (43.8 cm)
Cutter Wheel Thickness RG1625A SJR-S .5" (1.3 cm)
Cutting Depth 11" (28 cm)
Cutting Height 26" (66 cm)
Cutting Width RG1625SJR-S 38" (97 cm)

Toro STX-26



STX-26 Stump Grinder - 26hp 
Some dedicated stump grinders are over-complicated. Not the Toro STX. Its patented Toro  Dingo  TX-style control system has two simple levers that are simple to learn, master and use. Combine these easy-to-use controls with tracks and transport speeds exceeding 4 mph, and you get maximum productivity. Wet, hilly terrain won't stop you from accessing tough jobs year-round with an STX stump grinder. The tracks travel easily over muddy areas, with the low center of gravity adds side hill stability. In addition, the hydraulically driven head means no chance of expensive belts breaking or slipping no adjusting tension - guaranteeing optimal performs time after time.
Track Design
• Allows for zero turn capability  
• Provides a low center of gravity and large footprint  
• Increased stability on side hills  
• Eliminates tire ruts and flat tires  
• Operates in wet & soft ground conditions.  
• Get to the most challenging stumps  
• Fits easily through standard 36" (91 cm) gates  
Traction Controls    
Easy-to-use control system offers smooth operation and fewer lever/nobs than conventional stump grinders. Two simple controls operate all traction and grinder functions.  
1) Left/right traction control (forward, reverse, turn)  
2) Sweep, lift/lower and engagement of grinder head.  
Full Hydraulic Operation    
• Eliminate the labor of tightening or replacing expensive poly-chain belts or clutches  
• No need to replace expensive cogged pulleys  
• No worry of customers engaging grinder head at full throttle  
• Eliminate shock loads to the engine by belts slipping or head stopping  
Offset Cutting Head    
• Provides operator with excellent visibility to stump  
• Allows full rotation perpendicular to machine  


Cutting Depth
12.5" below grade
Cutting Height 35" above grade
Cutting Wheel 19" diameter to tooth; 3/4" thick, 12 green teeth
Dimensions 34"  W x 78" L x 48" H
Engine Kawasaki 730V Twin Cylinder
Head Swing 47" Arc
Hydraulic Flow 13.5 gpm hydraulic flow to head
Weight 1200 lbs.