Photos, descriptions and specs are for general reference and may vary- They may not depict actual Rental unit.

Mower, 48" Walk Behind
Mowers/Brush Cutters

* "Rent Now" is not a reservation or a guarantee of availability. An Associate will contact you once your request has been submitted. Equipment Makes & Models shown may vary from the actual Rental unit you receive.

Husqvarna WG4815E

The Husqvarna WG4815E commercial mower is exactly like the WG4815P model but instead of the pistol style controls, this model features the Easy Touch System for easier controls of the mower. The Husqvarna WG4815E still features a 15 horsepower Kawasaki engine and a 48" steel cutting deck. This model was formerly labeled as the W4815ET.

For additional information on this product please call us at 877-289-7368

Ferris FW25


The FW25 dual hydrostatic walk-behind packs the professional features of our FW35 model in a narrower package.

With easy-to-use controls, electric start and a top ground speed of 9,6 km/h, it’s all your crew needs to breeze through

lawn jobs with little effort. Heavy-duty construction and large, 20” tyres paired with a commercial-grade transmission make

the FW25 truly perform on those long work days.


Make Kawasaki - Petrol
Model FS600V
Horsepower 18,5 HP*
Cylinders / Displacement 2 Cylinders V-Twin / 603 cc
Cooling Air-cooled
PTO Electric PTO clutch
Starting Electric
Fuel Capacity (litres) 19 Litres
Cutting width (cm/inch) 91 cm / 36” Rear Discharge
Deck Configuration Rear discharge/mulching insert and mulching blades
Cutting Height (cm) 3,8 - 11,4 cm
Deck Construction 3,4 mm fabricated construction, full width double top
deck, 4,8 mm scuff guards, 9.5 mm leading edge,
overlap welded corners
Mower Spindles Cast aluminium 133 mm; 25,4 mm shaft
Deck lift system Central height adjustment with double hand wheels
Suspension N.A.
Transmission Independent Hydro-Gear® ZT-3100™ transaxles
Drive Axles 25,4 mm Tapered with 4-bolt flange
Drive Tyres (inch) 20 x 7.00 - 10 (4 ply)
Caster Tyres (inch) 11 x 4.00 - 5 (4 ply) flat free
Speed-fwd. (km/h) 0 -9,6 km/h
Speed-rev. (km/h) 0 - 4,5 km/h
Overall length (cm) 198
Overall width (cm) 94
Dry weight (kg) 288
Roll-Over Protection Structure N.A.
Instrumentation Speed indicator, hour meter
Controls Operator presence, cruise Control Bar, independent
forward and reverse levers, Foot-activated neutral
Parking Brake / Safety Circuit Integrated transaxle brake





  • Powered by Kawasaki 18,5 HP FS600V V-Twin air cooled petrol engine.
  • Two-stage industrial air-cleaner.
  • Electric start.
  • Easy to use oil drain tube.
  • 19 litres fuel tank.
  • Independent, commercial grade Hydro-Gear® ZT-3100™ transaxles, features 18 cm cooling fans that also assist in repelling debris.
  • Dual elevated hydro fluid reservoirs and dual hydro filters.
  • Ground speed up to 9,6 km/h.
  • Easy access to tracking adjustment.
  • Steel channel handlebars for increased strength and durability.
  • Cruise control bar.
  • Independant steering handles.
  • Convenient drive speed indicator.
  • 20” Drive tyres.
  • Flat free caster tyres.
  • Hour meter.
  • Available in 91 cm cutting width.
  • Fabricated deck construction with double top deck, overlap welded corners and double reinforced side skirts and steel reinforced leading edge.
  • Finite, pin style height of cut adjustment.
  • Cutting height: 3,8 - 11,4 cm.
  • Features top greaseable aluminium spindles.
  • Factory fitted rear discharge/mulching insert and mulching blades.
  • Heavy duty 3,0 mm, 38 x 51 mm frame rails.
  • 6,35 mm Engine mounting platform.
  • Convenient built in tie-down points for securing equipment.
  • Control rods securely placed above the engine deck and within the handle bars for optimized protection against damage and dirt.